My Sewing Machine

Sat Jul 4, 2009 at 1:16 am in Sewing

This week is all about Finishing Stuff Up.  After I discovered the likely huge problem with my sweater, I just couldn’t face it for a while. All those hours!  Luckily, I’d just gotten my sewing machine back from being tuned up, cleaned up and generally spiffied-up.  This led to several things:

  1. The finishing of the Birches and Aspens quilt. I’m putting in the last few stitches. I found a border! It’s really hard to sew! Oh, well.  It was the right thing, I think, so I’ll muddle through.
  2. A decision to not allow myself to start on any of my three new sewing projects until I get the pile of mending taken care of.  For 3.5 years I have ignored this pile, which now includes 6 pairs of pants to hem, 3 torn seams, 2 shirts and 2 skirts to take in, 2 buttons to sew on and I’m sure other things I don’t remember. It’s pathetic, it takes up a lot of space, and this week, it is all going away.

Finally, I realized I’ve never mentioned my beloved sewing machine. So although the month is nearly done and the meme was posted on June 1, I’m going to use the Sew, Mama, Sew meme to talk about one of my most loved things.

Here we go:

What brand and model do you have? Singer 5830-C.  It is a model that was sold for home economics classes. Therefore, it was (a) relatively inexpensive but more importantly (b) built like a rock for hard and inexpert use by silly teenagers and (c) simple to use for people just learning to sew.

Singer 5830-C in use

(My machine, above, with part of the base removed for hemming pants. When I sew, it always looks just like this with my pins and a pair of scissors resting there. My machine isn’t inset into a table, because honestly, I have moved too often to have a special piece of furniture for it!)

How long have you had it? I believe since 1995 (14 years!). My grandmother saw my fledgling hand-sewing efforts, and purchased this machine for me.

How much does that machine cost? My mom says about $100, but the prices online currently are more.

What types of things do you sew? I have sewn lots of home items but also quilts, clothing, handbags, paper…

How much do you sew? How much wear and tear does the machine get? Sometimes every day, sometimes weekly. I’ve used it fairly consistently except for the 2 years of grad school when I didn’t sew at all. Not sewing, incidentally, was one thing I really despised about that experience. There was just no room in my tiny NY apartment, and no time either.

Do you like/love/hate your machine? Are you ambivalent? Passionate? Does she have a name? Love my machine. Should she have a name? Velma?

What features does your machine have that work well for you? She’s well built, and is all metal internally. That’s the most important thing. Fairly heavy – stable. She has 10 stitches of varying lengths and widths, is easy to thread, she sews evenly, hasn’t any problem with thick fabrics or multiple layers, can sew very fast or pretty slow depending on my comfort level, she has never broken, only has tension issues when I do something stupid, has a convenient button-holer and a fair number of feet & whatsits. Oh, and she’s dead simple to use.  I need to get more of her special feet.

Stitch length, Buttonholer, Stitches, etc.

Is there anything that drives you nuts about your machine? Occasionally I wish for more arm room for quilting. And the bobbin threading can be irritating in the middle of a project if I haven’t pre-threaded enough.

Do you have a great story to share about your machine? I mentioned my grandmother got it for me. I guess what I’d mostly relate is that this machine is what really drop kicked me into crafting as a Thing Miriam Does A Whole Lot And Enjoys as opposed to Something I Did Once And Got Bored With Quickly. I love sewing and textiles in general, and I know I owe much of that to the speed with which I was able to teach myself to sew on this machine.

Oh, one more story. I didn’t know my machine had a thread cutter until last year when my mom said I probably did. I am almost an entirely self-taught sewer, and until I saw someone mention thread cutters on a blog, I just didn’t know it was a typical sewing machine feature! Lo and behold, my machine has one.

Would you recommend the machine to others? Why? Yes, certainly, if you can find one, because of its reliability. As far as whether I think someone would enjoy using the machine, I think it depends on what sort of sewer you are. Do you want to plug it into your computer and have 400 decorative butterfly stitches? Then this is not your machine. Do you just want a machine that won’t break to sew and mend garments, quilts and household items on a more-or-less regular basis? Then this might be your machine.

I have zero need for decorative hoo-ha on my machine, or a machine that does it all for me. I like machines and am not afraid of experimenting with them, and I like to know how they work inside and out. Thus a simple mechanical sewing machine I can take apart works perfectly for me. I like digital, but don’t like digital appliances. They break.

I find I still use the straight and zigzag stitches most of the time anyway, and I do appreciate owning something that’s what I actually need instead of having a bunch of stuff I don’t use. Plus, lord help any machine that requires high maintenance in this house. It would just stay broken. I just took my machine in for its very first professional tune-up the other week.  I’m not alone in my love for the beauty of practicality – my review of my machine here reminds me of the post that Irene of Mushroom Villagers wrote about the exquisite simplicity of her rock-solid 1950s Singer machine and how one might go about finding one like it.

What factors do you think are important to consider when looking for a new machine? I think it depends mightily on what your experience level is and what you want to sew. I’d look for peer reviews of people with blogs so I can see what they sew and how often with the machine they recommend. Find a professional seamstress or professional textiles crafter. I’d also take it for a test run in a store, see if I was comfortable with the controls, and try to sew something difficult or many-layered to see how it responded.

Do you have a dream machine? Not to replace my machine, I just want more specialization, machines that can extend what I can do.  One day, when I have space, I’ll consider a serger and maybe a long-arm quilter.

And that’s all she wrote. About her machine, anyway.

Update 11/6/2010: I’ve had some great commenters and a couple of people who have found this machine at garage sales. I hope you enjoy it! I’ll repeat a couple of things from the comments just because I think they’re important to owning this machine:

Singer 5830-C Sewing Machine

The product page for the Singer 5830 is here and has information and links. Go to this address:  Singer Sewing Machine Manuals and type in 5830 (no C) in the box to get a downloadable manual.  To find out what accessories (bobbins, feet, etc) are available for this machine, go to Singer Sewing Machine Accessories and type in 5830 (no C) to get a list of what else you can purchase for it.

The tension on this machine can be a bit of a bear, so I have a couple of pieces of advice. #1 – Before you start sewing with it, take it to a professional and have them clean and oil it, but most importantly have them set the tension. As I’ve shown in the photo, A is where the sewer adjusts tension for thick or thin fabrics, etc. if you really need to. B is where a professional should set the tension, and the user should NEVER mess with that lever!!!

My other piece of advice from now 15 or 16 years of using this machine is that if your tension is off and you get bad stitches in back, or if your thread breaks, just stop. Stop and unthread and rethread the machine entirely, both bobbin and upper thread. Do a general check – are you using the right thread for your project and material? Do you need to clean out the lint? Is there something else wrong? Then try again.

Update 11/27/2011: A useful question from the comments: If you’d like a brand-new machine that is similar to this machine, visit the Singer Scholastic section. There isn’t quite a “new model” of the 5830C. My machine is right in between the 5511 Scholastic Heavy Duty and the 8280 Scholastic.  Mine is a heavy-duty with 10 stitches, 4-step buttonholer, Free Arm and steel bed plate. The 5511 will be faster and more heavy-duty and has 11 stitches.  However the 8280 is the only Scholastic model with a free-arm, and I would have a hard time sewing without that feature.

Print This Page

16 Comments

feel free to leave a few words of your own...
Subscribe to this post's comments feed , or grab the TrackBack URI

I have the singer 5830 and I can’t figure out how to thread this “Special Easy Threading” machine. It is in the thread guide ection that is not making sense to me.

Donna — Wed Jul 15, 2009 at 5:07 pm (link)

I have a Singer Model 5825C purchased about 11 years ago. Since then, it has been used almost daily.I have looked into trading “up” to a newer machine such as the Singer Commercial model CG590. I think I’ll just keep my machine, it’s better built and we’ve bonded.

Laura — Sat Feb 13, 2010 at 5:23 am (link)

Hi Laura! These machines are pretty awesome, aren’t they? I know what you mean about bonding, I’m pretty well attached to mine.

Miriam — Tue Feb 16, 2010 at 11:16 am (link)

I also have a Singer 5830C. I have had it for about 5 years and it was what I could afford at the time, on clearance for about $60. It has been a life saver ever since. As all my other machines were hand-me-downs, I thought my first machine purchase would be fancier. Since I am still it love. It used it every now and again for the first two year; but weekly now, that I have enbarked on a new career waredrobe. Learning that it was made for Home Ec. means a lot. Those machines are built to last and even without a professional tune up, it runs with perfectly and pack a lot of power. I am add an industrial machine or a serger and maybe a computerized machine to do embroidery to the mix; but I will NOT be giving up my 5830c.

Marie — Mon Mar 29, 2010 at 9:04 am (link)

I feel the same way! I like how it has “grown with me.” I could use it easily when beginning, but it does well now that I have experience and want to branch out as well.

Miriam — Mon Mar 29, 2010 at 9:07 am (link)

I just bought this exact model at a yardsale this past weekend for $20 with a box of bobbins and feets. I’m a beginning sewer and what an exciting find that was! My mother is a beautiful seamstress and she inspires me. Although everything seems to be in fine working order, I plan to take it in for a good tune up this week. Mostly for the cleaning and oiling of parts. I’ve been printing out simple handbag and tote patterns here at work all day! Your review was excellent. I feel really good about my $20 investment now. :)

Cyndi H — Mon Aug 2, 2010 at 3:37 pm (link)

Thanks! It’s a good machine for starting (and continuing!) sewing – do you have the manual? If not you can download one from Singer for the basics.

Watch the thread tension – if the thread breaks or comes out of the needle, you should stop and re-thread both the needle and bobbin threads. If you don’t, the tension will be off. Also? Have the store set the tension on the metal lever on the right-hand side of the machine and never mess with it again! It’s picky about those things, but other than that there’s nothing really fussy about it!

Miriam — Wed Aug 4, 2010 at 9:20 am (link)

Thanks for that advice! I’ve already experienced the thread breaking repeatedly and that’s pretty frustrating. I’ll be taking it in this weekend. I’ll be sure to mention for them to set the tension correctly on the right side.

I’ve also printed out a complete manual that I’ve found online. Time to get stitching~

Cyndi H — Thu Aug 5, 2010 at 2:19 pm (link)

Cyndi H…

Would you care to post the URL for the “complete manual” that you mentioned??

We can’t find a user manual… and the BOTTOM tension is not right… actually bottom thread seems like NO tension at all.

I’m pretty sure I just don’t have the THREADING corrent… especially around the “top piece just above the needle”!??

Thanks in advance,
Steve

Steve K — Wed Aug 18, 2010 at 1:35 pm (link)

Hi Steve,

The manual can be found on the Singer website: Singer manuals. Just go to that address and look for the 5830C and you’ll find it.

There are two places to adjust tension on the Singer 5830C. The small metal lever on the far right hand side above the stitch length wheel, and the knob on the left hand side both control tension. It sounds as if you need the tension professionally set – the metal lever needs to be adjusted by a technician and then left alone. The other tension you can adjust.

Also, after tension is set, if the bottom tension still doesn’t work, then unthread and rethread the machine entirely and it should reset.

Miriam — Wed Aug 25, 2010 at 12:13 pm (link)

My mom called an hour ago from her cell while at a yard sale. She had found a Singer 5830c for $10.00, and asked me if she should purchase it. I said no until I could Google it and find out if the manual was free to download, and what type of feedback I could find. I found this blog, and downloaded the manual from Steve’s link above. The only thing they said they had trouble with was the tension…and we All know once the tension is right, DO NOT TOUCH!!! There was a lot of good info here and Thanks to you, and your blog….there is a new 5830c user, me. I will update here at a later time once I get sewing, and let you and others know of my 5830c experience!!!
Thanks again to All who Posted,
GOD BLESS,
ANN

Ann — Sat Nov 6, 2010 at 8:47 am (link)

I also have had a 5825C for about 15 years and have used it almost daily. I decided to “upgrade” in December to a CG 590.
It’s true the speed is epic and sews wonderfully, BUT the plastic parts are horrible. The bobbin winder spring fell off, I opened the machine to repair it and the part the spring hooks into on the plastic top cover was cracked! I will be attempting to have this repaired with the warranty, but I’m thinking of trading it on a heavy duty quilting machine to supplement my 5825C.

Laura S — Tue Feb 15, 2011 at 5:13 pm (link)

I have a 5830C that my mother in law gave me. Lately the tension is just whacky and I cannot seem to get it right. Your site led me to the online manual. Thanks!!

Sarah — Fri Jun 10, 2011 at 9:36 pm (link)

Glad to help :)

Miriam — Thu Jun 16, 2011 at 10:53 pm (link)

I have a 5825C, have had it for several years and for the first time I am needing to use the zipper foot. I cannot, for the life of me, get the zipper foot to snap on. Unfortunately, the manual does not supply instructions for attaching the zipper foot, part E. Does anyone have an answer or comment regarding this? Thank you.

Gloria — Tue Jul 12, 2011 at 8:51 am (link)

Susan C – I made an update to my post with the information you’re looking for.

Miriam — Sun Nov 27, 2011 at 4:02 pm (link)

Got something to say? Leave a comment!